Misconceptions of human factors concepts

Abstract

Like many scientific topics, Human Factors, and Ergonomics concepts are susceptible to being misunderstood by people unfamiliar with the subject matter. Most of the time these misunderstandings are harmless, like when a safety poster within a work setting encourages employees to 'overcome complacency'. This misunderstanding of complacency suggests it is a motivational aspect of human behaviour correctable with encouragement, whereas the human factors approach to overcoming complacency would be to evaluate how task design could diminish the destructive consequences of unexpected changes within a routine setting. No harm comes from the message within the safety poster, other than some wasted ink and paper, but misconceptions among particular audiences can eventually result in dire consequences for the human operator. This paper presents recent evidence that the concepts are being misapplied by casual consumers of human factors, particularly in the aftermath of accidents within complex systems, in ways detrimental to the core mission of improving the well-being of the human operator. Later, because this special issue presents new ways to demonstrate value via return on investment, practical efforts we can take to overcome such misconceptions are suggested.     

On the numerical solution of Fredholm integral equations utilizing the local radial basis function method

The current investigation describes a computational technique to solve one- and two-dimensional Fredholm integral equations of the second kind. The method estimates the solution using the discrete collocation method by combining locally supported radial basis functions (RBFs) constructed on a small set of nodes instead of all points over the analysed domain. In this work, we employ the Gauss–Legendre integration rule on the influence domains of shape functions to approximate the local integrals appearing in the method. In comparison with the globally supported RBFs for solving integral equations, the proposed method is stable and uses much less computer memory. The scheme does not require any cell structures, so it is meshless. We also obtain the error analysis of the proposed method and demonstrate that the convergence rate of the approach is high. Illustrative examples clearly show the reliability and efficiency of the new method.     

一种图像校正的偏振光罗盘系统的研究

导航传感器在探险、应急、精确制导武器、船舶、航空器导航和定位系统中起着关键作用。针对偏振光罗盘在倾斜状态下误差较大的问题,提出了一种利用加速度计和陀螺仪对偏振光罗盘进行图像校正的方法,设计了一种基于陀螺仪校正的偏振光罗盘系统。首先利用加速度计和陀螺仪计算得到载体姿态角,对偏振光图像数据进行图像校正,采用Stokes矢量法解算大气偏振模式分布,进而提取导航特征点,最后对特征点进行拟合解算出航向角信息。并且进行了静态和动态测试实验,实验结果表明,该算法能够有效的对偏振光罗盘姿态变化引起的误差进行补偿,可以将偏振光罗盘的航向角测量误差控制在1.86°之内,平均误差为0.09°。     

Chaos-Based transmitted-reference ultra-wideband communications

Transmitted-reference (TR) ultra-wideband (UWB) communication systems have gained increasing popularity for the usage in the low data rate application, due to its non-coherent receiver structure. In conventional TR system, non-coherency at the receiver is achieved by sending reference pulses prior to the data-bearing pulses. Then, at the receiver side, reference pulses are used as template signals for correlation with data-bearing pulses. Therefore, the orthogonality between reference and data pulses is obtained in time division multiple access (TDMA) fashion. However, the implementation of a wideband delay line is very difficult in the current low power integrated circuits. In this paper, a TR method called Chaos-Based TR (CB-TR) is proposed. In the proposed method, chaotic sequences are used to separate the reference and data pulses. Such approach exploits the benefits of chaotic signals, such as non-periodicity, easy-to-generate, impulse-like autocorrelation value and low cross-correlation value. Furthermore, in order to decrease the influence of some negative properties of conventional chaotic maps, a modified chaotic generator (MCS) is proposed. Simulation results over the IEEE 802.15.4a channel model show comparable bit error rate performance to other TR methods.     

读懂衡器的最大允许误差

本文主要讨论衡器的检定分度数能否大于传感器的最大检定分度数nmax,这是一直困扰大家和争论不休的问题。作者由分析最大允许误差mpe本质入手,指出mpe是人为规定的误差,不是传感器实际的物理特性。通过理论分析得出的对单只传感器的衡器,n≤nmax和v≥vmin的误差限原则是不能违背的。对于四只传感器的衡器,不受上述误差限原则限制。     

分级加载电压下考虑有效电势变化的软黏土电渗固结理论

分级加载电压技术能够有效延长电渗处理的时间,改善地基的处理效果并能有效降低能耗。在利用分级加载电压技术开展电渗试验时,随着土体的排水固结,土体各点的电势会发生明显的变化,这与现有的电渗固结理论假设土体各点电势保持不变有所差异。利用自主设计的电渗试验仪器开展了分级加载电压下的电渗室内试验,分析了电渗过程中土体有效电势变化的规律。基于该规律并结合Esrig固结理论建立了在阳极处不排水、阴极处排水条件下考虑土体有效电势变化的电渗固结理论,得到了分级加载电压条件下考虑土体有效电势变化的超静孔隙水压力和平均固结度的解析表达式。研究表明,在电压分级加载过程中,土体有效电势变化规律表现为随时间先基本保持不变,后呈抛物线状先增后减。通过试验案例验证了考虑土体有效电势变化所求得解析解的合理性,且该数值计算结果相较于Esrig数值计算结果,前者更加接近实测值,该固结方程的建立为后续分级加载电压技术的推广应用提供了理论依据,也为实际工程提供了参考。     

基于一种改进逐点比较插补法的激光打标机控制加工算法

在激光打标系统中,逐点比较插补法是一种普遍使用的算法。这种算法在控制激光运动轨迹和对图像轨迹的拟合过程中,起到极其重要的作用。由于逐点比较插补法具有运算直观,脉冲输出均匀,调节方便等特点,所以是一种较为适合打标机系统应用的插补算法。但是传统的逐点比较插补算法存在精度低和速度慢等问题。为了改善该算法的性能,对传统逐点比较插补算法进行了改进,并进行了计算和模拟仿真。结果表明改进比较插补算法在精度和速度上都有明显提高。     

A Voltage Control Method for a Distributed Line Feeder by means of Multiagent Approach

This paper proposes a method for the coordinated control of power factor by means of a multiagent approach. The proposed multiagent system consists of two types of agent: single feeder agent (F_AG) and bus agent (B_AG). In the proposed system, an F_AG plays as an important role, which decides the power factors of all distributed generators by executing the load flow calculations repeatedly. The voltage control strategies are implemented as the class definition of Java into the system. In order to verify the performance of the proposed method, it has been applied to a typical distribution model system. The simulation results show that the system is able to control very violent fluctuation of the demands and the photovoltaic (PV) generations.     

The control of abnormal grain growth in low-voltage SnO2 varistors by microseed addition

In this research, the addition effects of three different quantities of micron-sized seeds (microseeds) to a SnO₂ varistor prepared from nanomaterials on the microstructure and electrical properties were studied. Moreover, surge-withstanding capability of low-voltage SnO₂ varistors was investigated. The X-ray diffraction pattern disclosed a single phase SnO₂ for microseed grains. The morphological features of samples were characterized using scanning electron microscopy. The abnormal distribution of grain size with elongated grains of SnO₂ in fine grains matrix was observed in sintered samples without microseeds. The low content of microseed addition (0.3 wt%) had not controlled abnormal grain growth, however, it increased mean grain size to 37 µm. Although the high content of microseeds (7.5 wt%) stopped abnormal grain growth, it had a negative effect on relative density and mean grain size. The normal grain size distribution with maximum mean grain size (45 µm) was obtained in samples containing 1.5 wt% microseeds. These samples showed the lowest breakdown field (240 V/cm) and the highest surge-withstanding capability (1.5 kA/cm²). Furthermore, the standard deviation of the electrical parameters of these samples was improved due to normal grain-size distribution.     

Estimation of power density in IMPATT using different materials

ABSTRACT

The RF output power dissipated per unit area is calculated using Runge-Kutta method for the high-moderate-moderate-high (n⁺-n-p-p⁺) doping profile of double drift region (DDR)-based impact avalanche transit time (IMPATT) diode by taking different substrate at Ka band. Those substrates are silicon, gallium arsenide, germanium, wurtzite gallium nitride, indium phosphide and 4H-silicon carbide. A comparative study regarding power dissipation ability by the IMPATT using different material is being presented thereby modelling the DDR IMPATT diode in a one-dimensional structure. The IMPATT based on 4H-SiC element has highest power density in the order of 10¹⁰ Wm^?2 and the Si-based counterpart has lowest power density of order 10⁶ Wm^?2 throughout the Ka band. So, 4H-SiC-based IMPATT should be preferable over others for the power density preference based application. This result will be helpful to estimate the power density of the IMPATT for any doping profile and to select the proper element for the optimum design of the IMPATT as far as power density is concerned in the Ka band. Also, we have focused on variation of power density with different junction temperatures and modelled the heat sink with analysis of thermal resistances.